Darkmatter® · Designed and manufactured in India
Nebula D
The actual 3D design of the receiver. Turn it over and look at it from any side.
LinkExpressLRS 2.4GHz
Antennas2 × 65 mm
Rateup to F1000Hz
Inside the Nebula D
Small board.
Long reach.
Scroll to fly across the real board model.
The radio
2.4GHz ExpressLRS
The radio at the heart of the link, built for range and low latency.
Diversity
Two antennas
Two connectors, two 65 mm T-antennas. The link uses whichever hears better.
Wiring
Four pads
RX, TX, 5V and ground to any UART.
Turn it over
The other side.
The processor that runs ExpressLRS, with Wi-Fi for firmware updates.
Spec sheet
Nebula D specifications
A 2.4GHz ExpressLRS diversity receiver with telemetry: two antennas for a link that holds at range.
| Type | 2.4GHz ExpressLRS diversity receiver with telemetry |
|---|---|
| Telemetry power | Up to 100mW |
| Antennas | Two 65 mm T-antennas (antenna diversity) |
| Frequency range | 2.404–2.479 GHz (ISM band) |
| Maximum refresh rate | 500Hz / F1000Hz |
| Minimum refresh rate | 50Hz |
| Working voltage | 5V DC |
| Operating temperature | −20 °C to 70 °C |
| Made in | Designed and manufactured in India (Bally, West Bengal) |
Ready when you are
Book your Nebula D
Message us on WhatsApp. We reply with availability, price and delivery time, and help you pick the right parts for your build.
- Choosing a selection results in a full page refresh.
- Opens in a new window.